Model R Turbo Burr
$479.00
Woodward Fab Heck Industries Turbo-Burr
- Turbo-Burr
- Model R
- Easily brought to the worksite
- For use as both a hand and bench tool
- Puts a safety edge on sheet metal in on pass
- Breaks sharp edges on parts at mill, saw, or shear
Specification :
Rotation………….55,000 RPM (no load speed)
Air Consumption……….5 to 11 CFM-lubrication not needed.
Air Pressure………….60 to 120 PSI
Air Hose……………..1/4″
Burr type: 1/4″ diameter x 2″ length overall-solid carbide.
Depth of bevel………..0 to .075″ at 45°
Feed speeds:………….Up to 2″ per second
Weight……………….3.5 lbs. (1.6kg)
Perfect for deburring and edge finishing of:
- Ferrous and non-ferrous metals
- Plastics
- Stainless Steel
- Aluminum
- Laminates
- Printed circuit boards
If you are looking for a fast way to put a safety edge on sheet metal in one pass, then look no further than our popular Turbo-Burr®. This pneumatic tool uses a carbide burr rotating quickly in our patented designed v-block and fits nicely in your hand, allowing the user to quickly deburr the edge of sharp material in no time. Perfect for deburring and edge finishing of ferrous and non-ferrous metals, plastics, stainless steel, aluminum, laminates and printed circuit boards.
Model R
- With a small gap at the bottom of the “V”Block.
- Suitable for materials 0.135″ and heavier, where large burrs are present.
| Weight | 5 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
