MODEL 4 Trace a Punch


  • 3/16″ Cutting capacity Mild Steel / Plastic
  • 1/8″ Cutting Capacity Stainless Steel
  • 16″ Throat Depth
  • 220/440 Volt 3 phase
SKU: TAP-4 Category:

Use Trace-A-Punch® For:

  • Template Making and Duplicating
  • Low Production Fabricating

This is the easiest, most economical way to produce low production metal and plastic profiles. Trace-A-Punch® follows your guided template to produce burr free straight and contoured outlines and holes. Simple, rugged meehanite casting construction insures very little maintenance.

An existing part can be used as the master pattern or one can easily be made by tracing over acetate-plastic. .020-1/4″ with a sharp scribe or razor knife. An office copier can be used to produce a master by tracing on to mylar-plastic and cutting with scissors.


  • Easy to operate
  • Cuts most materials including plastic, stainless steel, and titanium without burrs or distortion
  • Makes blanks from a template without a blank die for try out
  • Easily and accurately cuts 60 linear inches per minute
  • Easily adjustable stripper
  • Accepts standard punches
  • Eliminates sawing and filing
  • Saves time over conventional cutting methods and improves accuracy
  • Size of blank limited only by what operator can  handle
  • Easy adjustable to thickness of metal
  • Cuts metal or plastic without tool change
Weight 560 lbs
Dimensions 36 × 24 × 30 in